432 lines
12 KiB
JSON
432 lines
12 KiB
JSON
{
|
|
"__data_type": "UTI ",
|
|
"AddCost": {
|
|
"type": "dword",
|
|
"value": 750
|
|
},
|
|
"BaseItem": {
|
|
"type": "int",
|
|
"value": 7
|
|
},
|
|
"Charges": {
|
|
"type": "byte",
|
|
"value": 0
|
|
},
|
|
"Comment": {
|
|
"type": "cexostring",
|
|
"value": ""
|
|
},
|
|
"Cost": {
|
|
"type": "dword",
|
|
"value": 900
|
|
},
|
|
"Cursed": {
|
|
"type": "byte",
|
|
"value": 0
|
|
},
|
|
"DescIdentified": {
|
|
"type": "cexolocstring",
|
|
"value": {
|
|
"0": "The Martini-Henry was a breech-loading single-shot lever-actuated rifle adopted by the British, combining an action worked on by Friedrich von Martini (in certain respects resembling, and sometimes claimed to be based on, the Peabody rifle developed by Henry Peabody), with the rifled barrel designed by Scotsman Alexander Henry. It first entered service in 1871 replacing the Snider-Enfield, and variants were used throughout the British Empire for 30 years. Though the Snider was the first breechloader firing a metallic cartridge in the British service, the Martini was designed from the outset as a breechloader and was both faster firing and had a longer range.\n\nThere are four classes of the Martini-Henry rifle: Mark I (released in June 1871), Mark II, Mark III, and Mark IV. There was also an 1877 carbine version with variations that included a Garrison Artillery Carbine, an Artillery Carbine (Mark I, Mark II, and Mark III), and smaller versions designed as training rifles for military cadets. The Mark IV Martini-Henry rifle ended production in the year 1889, but remained in service throughout the British Empire until the end of the First World War. It was seen in use by some Afghan tribesmen as late as the Soviet invasion. Early in 2010 and 2011, United States Marines recovered at least three from various Taliban weapons caches in Marjah. In April 2011, another Martini-Henry rifle was found near Orgun in Paktika Province by United States Army's 101st Airborne Division (Air Assault).\n\nThe Martini-Henry was copied on a large scale by North-West Frontier Province gunsmiths. Their weapons were of a poorer quality than those made by Royal Small Arms Factory, Enfield, but accurate down to the proof markings. The chief manufacturers were the Adam Khel Afridi, who lived around the Khyber Pass. The British called such weapons, \"Pass made rifles\".\n\nThe lock and breech are held to the stock by a metal bolt (A). The breech is closed by the block (B) which turns on the pin (C) that passes through the rear of the block. The end of the block is rounded to form a knuckle joint with the back of the case (D) which receives the force of the recoil rather than the pin (C).\n\nBelow the trigger-guard the lever (E) works a pin (F) which projects the tumbler (G) into the case. The tumbler moves within a notch (H) and acts upon the block, raising it into the firing position or allowing it to fall according to the position of the lever.\n\nThe block (B) is hollowed along its upper surface (I) to assist in inserting a cartridge into the firing chamber (J). To explode the cartridge the block is raised to position the firing mechanism (K) against the cartridge. The firing mechanism consists of a helical spring around a pointed metal striker, the tip of which passes through a hole in the face of the block to impact the percussion-cap of the inserted cartridge. As the lever (E) is moved forward the tumbler (G) revolves and one of its arms engages and draws back the spring until the tumbler is firmly locked in the notch (H) and the spring is held by the rest-piece (L) which is pushed into a bend in the lower part of the tumbler.\n\nAfter firing, the cartridge is partially extracted by the lock. The extractor rotates on a pin (M) and has two vertical arms (N), which are pressed by the rim of the cartridge pushed home into two grooves in the sides of the barrel. A bent arm (O), forming an 80° angle with the extractor arms, is forced down by the dropping block when the lever is pushed forward, so causing the upright arms to extract the cartridge case slightly and allow easier manual full extraction.\n\nAs well as British service rifles, the Martini breech action was applied to shotguns by the Greener company of Britain, whose single-shot 'EP' riot guns were still in service in the 1970s in former British colonies. The Greener 'GP' shotgun, also using the Martini action, was a favourite rough-shooting gun in the mid-20th century. The martini action was used by BSA and latterly BSA/Parker Hale for their series of \"Small Action Martini\" small bore target rifles that were in production until 1955."
|
|
}
|
|
},
|
|
"Description": {
|
|
"type": "cexolocstring",
|
|
"value": {
|
|
"0": ""
|
|
}
|
|
},
|
|
"Identified": {
|
|
"type": "byte",
|
|
"value": 1
|
|
},
|
|
"LocalizedName": {
|
|
"type": "cexolocstring",
|
|
"value": {
|
|
"0": "Martini-Henry"
|
|
}
|
|
},
|
|
"ModelPart1": {
|
|
"type": "byte",
|
|
"value": 11
|
|
},
|
|
"ModelPart2": {
|
|
"type": "byte",
|
|
"value": 11
|
|
},
|
|
"ModelPart3": {
|
|
"type": "byte",
|
|
"value": 11
|
|
},
|
|
"PaletteID": {
|
|
"type": "byte",
|
|
"value": 126
|
|
},
|
|
"Plot": {
|
|
"type": "byte",
|
|
"value": 0
|
|
},
|
|
"PropertiesList": {
|
|
"type": "list",
|
|
"value": [
|
|
{
|
|
"__struct_id": 0,
|
|
"ChanceAppear": {
|
|
"type": "byte",
|
|
"value": 100
|
|
},
|
|
"CostTable": {
|
|
"type": "byte",
|
|
"value": 3
|
|
},
|
|
"CostValue": {
|
|
"type": "word",
|
|
"value": 13
|
|
},
|
|
"Param1": {
|
|
"type": "byte",
|
|
"value": 255
|
|
},
|
|
"Param1Value": {
|
|
"type": "byte",
|
|
"value": 0
|
|
},
|
|
"PropertyName": {
|
|
"type": "word",
|
|
"value": 15
|
|
},
|
|
"Subtype": {
|
|
"type": "word",
|
|
"value": 548
|
|
}
|
|
},
|
|
{
|
|
"__struct_id": 0,
|
|
"ChanceAppear": {
|
|
"type": "byte",
|
|
"value": 100
|
|
},
|
|
"CostTable": {
|
|
"type": "byte",
|
|
"value": 3
|
|
},
|
|
"CostValue": {
|
|
"type": "word",
|
|
"value": 13
|
|
},
|
|
"Param1": {
|
|
"type": "byte",
|
|
"value": 255
|
|
},
|
|
"Param1Value": {
|
|
"type": "byte",
|
|
"value": 0
|
|
},
|
|
"PropertyName": {
|
|
"type": "word",
|
|
"value": 15
|
|
},
|
|
"Subtype": {
|
|
"type": "word",
|
|
"value": 547
|
|
}
|
|
},
|
|
{
|
|
"__struct_id": 0,
|
|
"ChanceAppear": {
|
|
"type": "byte",
|
|
"value": 100
|
|
},
|
|
"CostTable": {
|
|
"type": "byte",
|
|
"value": 0
|
|
},
|
|
"CostValue": {
|
|
"type": "word",
|
|
"value": 0
|
|
},
|
|
"Param1": {
|
|
"type": "byte",
|
|
"value": 255
|
|
},
|
|
"Param1Value": {
|
|
"type": "byte",
|
|
"value": 0
|
|
},
|
|
"PropertyName": {
|
|
"type": "word",
|
|
"value": 144
|
|
},
|
|
"Subtype": {
|
|
"type": "word",
|
|
"value": 2
|
|
}
|
|
},
|
|
{
|
|
"__struct_id": 0,
|
|
"ChanceAppear": {
|
|
"type": "byte",
|
|
"value": 100
|
|
},
|
|
"CostTable": {
|
|
"type": "byte",
|
|
"value": 0
|
|
},
|
|
"CostValue": {
|
|
"type": "word",
|
|
"value": 0
|
|
},
|
|
"Param1": {
|
|
"type": "byte",
|
|
"value": 255
|
|
},
|
|
"Param1Value": {
|
|
"type": "byte",
|
|
"value": 0
|
|
},
|
|
"PropertyName": {
|
|
"type": "word",
|
|
"value": 149
|
|
},
|
|
"Subtype": {
|
|
"type": "word",
|
|
"value": 2
|
|
}
|
|
},
|
|
{
|
|
"__struct_id": 0,
|
|
"ChanceAppear": {
|
|
"type": "byte",
|
|
"value": 100
|
|
},
|
|
"CostTable": {
|
|
"type": "byte",
|
|
"value": 34
|
|
},
|
|
"CostValue": {
|
|
"type": "word",
|
|
"value": 2
|
|
},
|
|
"Param1": {
|
|
"type": "byte",
|
|
"value": 255
|
|
},
|
|
"Param1Value": {
|
|
"type": "byte",
|
|
"value": 0
|
|
},
|
|
"PropertyName": {
|
|
"type": "word",
|
|
"value": 143
|
|
},
|
|
"Subtype": {
|
|
"type": "word",
|
|
"value": 0
|
|
}
|
|
},
|
|
{
|
|
"__struct_id": 0,
|
|
"ChanceAppear": {
|
|
"type": "byte",
|
|
"value": 100
|
|
},
|
|
"CostTable": {
|
|
"type": "byte",
|
|
"value": 33
|
|
},
|
|
"CostValue": {
|
|
"type": "word",
|
|
"value": 9
|
|
},
|
|
"Param1": {
|
|
"type": "byte",
|
|
"value": 255
|
|
},
|
|
"Param1Value": {
|
|
"type": "byte",
|
|
"value": 0
|
|
},
|
|
"PropertyName": {
|
|
"type": "word",
|
|
"value": 145
|
|
},
|
|
"Subtype": {
|
|
"type": "word",
|
|
"value": 0
|
|
}
|
|
},
|
|
{
|
|
"__struct_id": 0,
|
|
"ChanceAppear": {
|
|
"type": "byte",
|
|
"value": 100
|
|
},
|
|
"CostTable": {
|
|
"type": "byte",
|
|
"value": 28
|
|
},
|
|
"CostValue": {
|
|
"type": "word",
|
|
"value": 1
|
|
},
|
|
"Param1": {
|
|
"type": "byte",
|
|
"value": 255
|
|
},
|
|
"Param1Value": {
|
|
"type": "byte",
|
|
"value": 0
|
|
},
|
|
"PropertyName": {
|
|
"type": "word",
|
|
"value": 151
|
|
},
|
|
"Subtype": {
|
|
"type": "word",
|
|
"value": 0
|
|
}
|
|
},
|
|
{
|
|
"__struct_id": 0,
|
|
"ChanceAppear": {
|
|
"type": "byte",
|
|
"value": 100
|
|
},
|
|
"CostTable": {
|
|
"type": "byte",
|
|
"value": 0
|
|
},
|
|
"CostValue": {
|
|
"type": "word",
|
|
"value": 0
|
|
},
|
|
"Param1": {
|
|
"type": "byte",
|
|
"value": 255
|
|
},
|
|
"Param1Value": {
|
|
"type": "byte",
|
|
"value": 0
|
|
},
|
|
"PropertyName": {
|
|
"type": "word",
|
|
"value": 146
|
|
},
|
|
"Subtype": {
|
|
"type": "word",
|
|
"value": 3
|
|
}
|
|
},
|
|
{
|
|
"__struct_id": 0,
|
|
"ChanceAppear": {
|
|
"type": "byte",
|
|
"value": 100
|
|
},
|
|
"CostTable": {
|
|
"type": "byte",
|
|
"value": 0
|
|
},
|
|
"CostValue": {
|
|
"type": "word",
|
|
"value": 0
|
|
},
|
|
"Param1": {
|
|
"type": "byte",
|
|
"value": 255
|
|
},
|
|
"Param1Value": {
|
|
"type": "byte",
|
|
"value": 0
|
|
},
|
|
"PropertyName": {
|
|
"type": "word",
|
|
"value": 152
|
|
},
|
|
"Subtype": {
|
|
"type": "word",
|
|
"value": 1
|
|
}
|
|
},
|
|
{
|
|
"__struct_id": 0,
|
|
"ChanceAppear": {
|
|
"type": "byte",
|
|
"value": 100
|
|
},
|
|
"CostTable": {
|
|
"type": "byte",
|
|
"value": 0
|
|
},
|
|
"CostValue": {
|
|
"type": "word",
|
|
"value": 0
|
|
},
|
|
"Param1": {
|
|
"type": "byte",
|
|
"value": 255
|
|
},
|
|
"Param1Value": {
|
|
"type": "byte",
|
|
"value": 0
|
|
},
|
|
"PropertyName": {
|
|
"type": "word",
|
|
"value": 147
|
|
},
|
|
"Subtype": {
|
|
"type": "word",
|
|
"value": 1
|
|
}
|
|
},
|
|
{
|
|
"__struct_id": 0,
|
|
"ChanceAppear": {
|
|
"type": "byte",
|
|
"value": 100
|
|
},
|
|
"CostTable": {
|
|
"type": "byte",
|
|
"value": 35
|
|
},
|
|
"CostValue": {
|
|
"type": "word",
|
|
"value": 1
|
|
},
|
|
"Param1": {
|
|
"type": "byte",
|
|
"value": 255
|
|
},
|
|
"Param1Value": {
|
|
"type": "byte",
|
|
"value": 0
|
|
},
|
|
"PropertyName": {
|
|
"type": "word",
|
|
"value": 141
|
|
},
|
|
"Subtype": {
|
|
"type": "word",
|
|
"value": 0
|
|
}
|
|
}
|
|
]
|
|
},
|
|
"StackSize": {
|
|
"type": "word",
|
|
"value": 1
|
|
},
|
|
"Stolen": {
|
|
"type": "byte",
|
|
"value": 0
|
|
},
|
|
"Tag": {
|
|
"type": "cexostring",
|
|
"value": "martini_henry"
|
|
},
|
|
"TemplateResRef": {
|
|
"type": "resref",
|
|
"value": "martini_henry"
|
|
}
|
|
}
|